Manualsbrain.com
  1. Manuals
  2. Brands
  3. Atmel
  4. Evaluation Kit AT91SAM9X25-EK
  5. Data Sheet

Atmel Evaluation Kit AT91SAM9X25-EK AT91SAM9X25-EK Data Sheet

Product codes
AT91SAM9X25-EK
Download
Page of 1151
859
SAM9X25 [DATASHEET]
11054E–ATARM–10-Mar-2014
1: There has been a time-out since the last Start Time-out command (STTTO in US_CR). 
• TXEMPTY: Transmitter Empty
0: There are characters in either US_THR or the Transmit Shift Register, or the transmitter is disabled.
1: There are no characters in US_THR, nor in the Transmit Shift Register.
• ITER: MaxNumber of Repetitions Reached 
0: Maximum number of repetitions has not been reached since the last RSTSTA.
1: Maximum number of repetitions has been reached since the last RSTSTA.
• NACK: Non Acknowledge Interrupt
0: Non Acknowledge has not been detected since the last RSTNACK.
1: At least one Non Acknowledge has been detected since the last RSTNACK.
• CTSIC: Clear to Send Input Change Flag
0: No input change has been detected on the CTS pin since the last read of US_CSR.
1: At least one input change has been detected on the CTS pin since the last read of US_CSR.
• CTS: Image of CTS Input
0: CTS is set to 0.
1: CTS is set to 1.
• MANERR: Manchester Error
0: No Manchester error has been detected since the last RSTSTA.
1: At least one Manchester error has been detected since the last RSTSTA.