Atmel SAM4S-EK2 Atmel ATSAM4S-EK2 ATSAM4S-EK2 Data Sheet
Product codes
ATSAM4S-EK2
946
SAM4S [DATASHEET]
11100E–ATARM–24-Jul-13
39.7.2 UDP Global State Register
Name:
UDP_GLB_STAT
Address:
0x40034004
Access:
Read-write
This register is used to get and set the device state as specified in Chapter 9 of the USB Serial Bus Specification, Rev.2.0.
• FADDEN: Function Address Enable
Read:
0 = Device is not in address state.
1 = Device is in address state.
Write:
0 = No effect, only a reset can bring back a device to the default state.
1 = Sets device in address state. This occurs after a successful Set Address request. Beforehand, the UDP_FADDR register must
have been initialized with Set Address parameters. Set Address must complete the Status Stage before setting FADDEN. Refer
to chapter 9 of the Universal Serial Bus Specification, Rev. 2.0 for more details.
have been initialized with Set Address parameters. Set Address must complete the Status Stage before setting FADDEN. Refer
to chapter 9 of the Universal Serial Bus Specification, Rev. 2.0 for more details.
• CONFG: Configured
Read:
0 = Device is not in configured state.
1 = Device is in configured state.
Write:
0 = Sets device in a non configured state
1 = Sets device in configured state.
The device is set in configured state when it is in address state and receives a successful Set Configuration request. Refer to
Chapter 9 of the Universal Serial Bus Specification, Rev. 2.0 for more details.
Chapter 9 of the Universal Serial Bus Specification, Rev. 2.0 for more details.
• ESR: Enable Send Resume
0 = Mandatory value prior to starting any Remote Wake Up procedure.
1 = Starts the Remote Wake Up procedure if this bit value was 0 and if RMWUPE is enabled.
• RMWUPE: Remote Wake Up Enable
0 = The Remote Wake Up feature of the device is disabled.
1 = The Remote Wake Up feature of the device is enabled.
31
30
29
28
27
26
25
24
–
–
–
–
–
–
–
–
23
22
21
20
19
18
17
16
–
–
–
–
–
–
–
–
15
14
13
12
11
10
9
8
–
–
–
–
–
–
–
–
7
6
5
4
3
2
1
0
–
–
–
RMWUPE
RSMINPR
ESR
CONFG
FADDEN