Infineon Technologies Door Module Power IC TLE 8201R DEMOBOARD TLE8201R DEMOBOARD TLE8201R Data Sheet
Product codes
DEMOBOARD TLE8201R
Data Sheet Rev. 2.0
1
2006-06-07
Door Module Power IC
TLE 8201R
TLE 8201R
Data Sheet Rev. 2.0
Features
• Full bridge (150m
Ω
) for main doorlock motor
• Two half-bridges (400m
Ω
) for deadbolt and mirror
position motor or mirror fold motor
• Two half-bridges (800m
Ω
) for mirror position
• High-side switch (100m
Ω
) for mirror defrost
• Four high-side switches (500m
Ω
) for 5W and 10W
lamps
• Current sense analog output with multiplex
• All outputs with short circuit protection and diagnosis
• Over-temperature protection with warning
• Open load diagnosis for all outputs
• Charge pump-Output for n-channel MOS-FET reverse-polarity protection
• Very low current consumption in sleep mode
• Standard 16-bit SPI for control and diagnosis
• Over-and Undervoltage Lockout
• Power-SO package with full-size heatslug for excellent low thermal resistance
• All outputs with short circuit protection and diagnosis
• Over-temperature protection with warning
• Open load diagnosis for all outputs
• Charge pump-Output for n-channel MOS-FET reverse-polarity protection
• Very low current consumption in sleep mode
• Standard 16-bit SPI for control and diagnosis
• Over-and Undervoltage Lockout
• Power-SO package with full-size heatslug for excellent low thermal resistance
Functional Description
The TLE 8201R is an Application Specific Standard Product for automotive door-module
applications. It includes all the power stages necessary to drive the loads in a typical front
door application, i.e. central lock, deadlock or mirror fold, mirror position, mirror defrost
and 5W or 10W lamps, e.g for turn signal, courtesy/warning or control panel illumination.
It is designed as a monolithic circuit in Infineons mixed technology SPT which combines
bipolar and CMOS control circuitry with DMOS power devices.
applications. It includes all the power stages necessary to drive the loads in a typical front
door application, i.e. central lock, deadlock or mirror fold, mirror position, mirror defrost
and 5W or 10W lamps, e.g for turn signal, courtesy/warning or control panel illumination.
It is designed as a monolithic circuit in Infineons mixed technology SPT which combines
bipolar and CMOS control circuitry with DMOS power devices.
Short circuit and over-temperature protection and a detailed diagnosis are in line with the
safety requirements of automotive applications. The current sense output allows to
improve the total system performance. The standard SPI interface saves microcontroller
I/O lines while still giving flexible control of the power stages and a detailed diagnosis.
safety requirements of automotive applications. The current sense output allows to
improve the total system performance. The standard SPI interface saves microcontroller
I/O lines while still giving flexible control of the power stages and a detailed diagnosis.
Type
Ordering Code
Package/Shipment
TLE 8201R
-
PG-DSO-36-27