Atmel Xplained Pro Evaluation Kit ATSAMD20-XPRO ATSAMD20-XPRO Data Sheet

264

Atmel | SMART SAM D20 [DATASHEET]

Atmel-42129K–SAM-D20_datasheet–06/2014

The EEPROM bits indicates the Flash size reserved for EEPROM emulation according to the 

. EEPROM 

resides in the upper rows of the NVM main address space and are writable, regardless of the region lock status.

Note:

1.

the actual size of the EEPROM depends on the emulation software. For more information see Application Note AT03265

The security bit allows the entire chip to be locked from external access for code security. The security bit can be written 
by a dedicated command, Set Security Bit (SSB). Once set, the only way to clear the security bit is through a debugger 
Chip Erase command. After issuing the SSB command, the PROGE error bit can be checked. Refer to 

 for details.

The NVM Controller cache reduces the device power consumption and improves system performance when wait states 
are required. It is a direct-mapped cache that implements 8 lines of 64 bits (i.e., 64 bytes). NVM Controller cache can be 
enabled by writing a zero in the CACHEDIS bit in the CTRLB register (CTRLB.CACHEDIS). Cache can be configured to 
three different modes using the READMODE bit group in the CTRLB register. Refer to 

more details. The INVALL command can be issued through the CTRLA register to invalidate all cache lines. Commands 
affecting NVM content automatically invalidate cache lines.

3

16

4096

2

32

8192

1

64

16384

0

128

32768

7

None

0

6

1

256

5

2

512

4

4

1024

3

8

2048

2

16

4096

1

32

8192

0

64

16384