Mikroelektronika MIKROE-350 Data Sheet

424

- SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD

CHAPTER 6

sub procedure SPI_T6963C_WriteCommand(dim Ddata as byte)

Nothing.

Writes command to T6963C controller via SPI interface.

Parameters : 

- 

Ddata:

command to be written 

Toshiba Glcd module needs to be initialized. See SPI_T6963C_Config routine.

SPI_T6963C_WriteCommand(SPI_T6963C_CURSOR_POINTER_SET)

sub procedure SPI_T6963C_SetPtr(dim p as word, dim c as byte)

Nothing.

Sets the memory pointer p for command c.

Parameters : 

- 

p:

address where command should be written 

- 

c:

command to be written 

SToshiba Glcd module needs to be initialized. See SPI_T6963C_Config routine.

SPI_T6963C_SetPtr(T6963C_grHomeAddr + start,
T6963C_ADDRESS_POINTER_SET)

sub procedure SPI_T6963C_WaitReady()

Nothing.

Pools the status byte, and loops until Toshiba Glcd module is ready.

Toshiba Glcd module needs to be initialized. See SPI_T6963C_Config routine.

SPI_T6963C_WaitReady()