Linear Technology DC887A - LTC1408 14-bit, 6-ch. Simult-Sampling ADC, (requires DC890B) DC887A DC887A Data Sheet
Product codes
DC887A
3
dc846af
DEMO MANUAL DC846A
QUICK START PROCEDURE
Connect DC846 to a DC590 USB Serial Controller using
the supplied 14 conductor ribbon cable. Connect DC590
to host PC with a standard USB A/B cable. Run the evalu-
ation software supplied with DC590 or downloaded from
www.linear.com/software. The correct program will be
loaded automatically. Click the COLLECT button to start
reading the input voltage. Click the slider at the bottom
the supplied 14 conductor ribbon cable. Connect DC590
to host PC with a standard USB A/B cable. Run the evalu-
ation software supplied with DC590 or downloaded from
www.linear.com/software. The correct program will be
loaded automatically. Click the COLLECT button to start
reading the input voltage. Click the slider at the bottom
of the strip chart display to change the oversample ratio
(OSR) which will in turn change the data output rate.
(OSR) which will in turn change the data output rate.
Tools are available for logging data, changing reference
voltage, changing the number of points in the strip chart
and histogram, and changing the number of points aver-
aged for the DVM display.
voltage, changing the number of points in the strip chart
and histogram, and changing the number of points aver-
aged for the DVM display.