Trl Funksysteme 60502-0500 IRIS MODEM USB 433MHz ANGLED ANTENNA Component 60502-0500 Data Sheet

IRIS-USB-Short manual-1a

IRIS-USB – Getting started 

IRIS-USB is part of the IRIS series and is developed for relaying data via radio to and from 

computers with USB interface and other systems connected to IRIS products. The IRIS series 

contains several models that provide solutions to all kinds of applications. All IRIS models can 

communicate with each other via radio, in pairs or in more complex radio networks. 

Getting started

Connect the USB cable (type B).

The IRIS-USB will appear as a serial port on the PC. If it does not you might need a driver. If it is 

needed a correct driver can be found on the CD or downloaded from:

http://www.ftdichip.com/Drivers/VCP.htm (USB circuit - FT232R).

Place the IRIS-USB so that the antenna is not shielded. 

Avoid metal plating close to and between the antennas.

IRIS-USB – Product description 

IRIS-USB can be used with a PC with USB interface. The most common use of IRIS-USB 

is connected to a PC for collecting data and controlling equipment in an external system. 

Commands can be sent to machines with serial interface via IRIS-RS232 and IRIS-RS485, 

electrical signals can be controlled via IRIS-IO, data can be stored in a database via an IRIS-

CUW and data can be sent to the PC from all the other units. With functions like timers, counters 

and text matching the IRIS-USB can setup to fit many different applications.

USB interface