Trl Funksysteme 60101 IRIS MODEM RS232 433MHz ANGLED ANTENNA Component 60101 Data Sheet

IRIS-RS232-Short manual-1a

IRIS-RS232 – Getting started 

IRIS-RS232 is part of the IRIS series and is developed for relaying data via radio from 

systems with a RS-232 interface to other systems connected to IRIS products. The IRIS series 

contains several models that provide solutions to all kinds of applications. All IRIS models can 

communicate with each other via radio, in pairs or in more complex radio networks. 

�

�

�

�

�

�

�

�

�

Getting started

Connect the serial interface (only Rx, Tx and signal ground are needed) 

Connect the power supply. The polarity of the power does not matter. 

Place the IRIS-RS232 so that the antenna is not shielded.  

Avoid metal plating close to and between the antennas.

IRIS-RS232 – Product description 

IRIS-RS232 can be used with systems with a RS-232 interface. The most common use of IRIS-

RS232 is a pair of IRIS-RS232 that relays data between two systems. This is however not the 

only application where an IRIS-RS232 can be used. A PC with an IRIS-RS232 can be used for 

monitor and control other systems. Commands can be sent to machines with serial interface via 

IRIS-RS232 and IRIS-RS485, electrical signals can be controlled via IRIS-IO, data can be stored 

in a database via an IRIS-CUW and data can be sent to the PC from all the other units. With 

functions like timers, counters and text matching the IRIS-RS232 can setup to fit many different 

applications.

Serial interface

Power

IRIS-RS232 - D-sub

2. Rx - Receive data 

3. Tx - Transmitt data 

5. Ground