On Semiconductor LV5026MC Evaluation Board LV5026MCGEVB LV5026MCGEVB Data Sheet
Product codes
LV5026MCGEVB
51012 SY/42512 SY 20120323-S00003 No.A2042-1/16
http://onsemi.com
Semiconductor Components Industries, LLC, 2013
August, 2013
August, 2013
LV5026MC
Overview
LV5026MC is a High voltage LED drive controller which drives LED current up to 3A with external MOSFET.
LV5026MC is realized very simple LED circuits with a few external parts. It corresponds to various wide dimming
controls including the TRIAC dimming control.
Note) This LV5026MC is designed or developed for general use or consumer appliance. Therefore, it is NOT permitted
LV5026MC is realized very simple LED circuits with a few external parts. It corresponds to various wide dimming
controls including the TRIAC dimming control.
Note) This LV5026MC is designed or developed for general use or consumer appliance. Therefore, it is NOT permitted
to use for automotive, communication, office equipment, industrial equipment.
Functions
• High voltage LED controller
• Short protection circuit
• Various Dimming Control
• Selectable reference Voltage
-TRIAC & Analog Input & PWM Input
-Internal 0.605V & External Input Voltage
• Soft Start function
• Low noise switching system/skip frequency function
• Built-in TRIAC stabilized function
- 5 stages skip mode Frequency
• Built-in circuit of detection of overvoltage of CS pin.
- Soft driving
• Selectable Switching frequency [50kHz or 70kHz, open: 50kHz]
Specifications
Maximum Ratings at Ta = 25
°C
Parameter Symbol
Conditions
Ratings
Unit
Maximum input voltage
VIN max (Note1)
-0.3 to 42
V
REF_OUT, REF_IN, RT, CS,
PWM_D, ACS
-0.3 to 7
V
OUT1 pin
VOUT_abs
-0.3 to 42
V
OUT2 pin
VOUT2_abs
-0.3 to 42
V
Allowable power dissipation
Pd max
With specified board*
1.0
W
Junction temperature
Tj
150
°C
Operating junction temperature
Topj (Note2)
-30 to +125
°C
Storage temperature
Tstg
-40 to +150
°C
*1 Specified board: 58.0mm × 54.0mm × 1.6mm (glass epoxy board)
Note1) Absolute maximum ratings represent the values which cannot be exceeded for any length of time.
Note2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current, high
voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details.
Bi-CMOS IC
LED Driver IC
Ordering number : ENA2042A
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.