On Semiconductor CCRACGEVB Evaluation Board CCRACGEVB CCRACGEVB Data Sheet

J1

Bypass Cap Drop Circuit

J2

Enable C1

J3

Enable C2

J4

Enable C3

J5

Enable C4

J6

Enable C5

J7

Enable Straight Dimmable Circuit

J8

Enable Chopper Circuit

J9

Enable Zener Diode for Cap Drop Circuit

J10

Enable Output Capacitors

J11

Enable CCR3 for all Circuits

J12

Enable CCR4 for all Circuits

J13

Enable CCR5 for all Circuits

J14

Enable CCR6 for all Circuits

J15

Allows Selection of R3 for Straight Dimmable Circuit

J16

Allows Selection of R4 for Straight Dimmable Circuit

J17

Allows CCR6 Current to be adjusted

J18

Bypass Inrush Current Limiter

J19

Bypass Straight Dimmable Adjustable Resistor

J20

Bypass Chopper FET

J21

Enable Chopper/Cap Drop Dimmable Circuit

J22

Bypass Chopper/Cap Drop Dimmable Circuit FET

J23

Enable parallel LED Strings (2 Strings of 3-5 LEDs in parallel)

J24

Enable Extended Straight LED String (6-10 in series)

J25

Bypass LEDs D14 and D15

J26

Enable single LED String or parallel LED String

J27

Bypass LEDs D19 and D20

J28

Bypass C7

ON Semiconductor and          are registered trademarks of Semiconductor Components Industries, LLC (SCILLC).  SCILLC owns the rights to a number of patents, trademarks,

copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf.  SCILLC

reserves the right to make changes without further notice to any products herein.  SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any

particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without

limitation special, consequential or incidental damages.  “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications

and actual performance may vary over time.  All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts.  SCILLC

does not convey any license under its patent rights nor the rights of others.  SCILLC products are not designed, intended, or authorized for use as components in systems intended for

surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where

personal injury or death may occur.  Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and

its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,

any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture

of the part.  SCILLC is an Equal Opportunity/Affirmative Action Employer.  This literature is subject to all applicable copyright laws and is not for resale in any manner.

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Phone: 421 33 790 2910

Phone: 81−3−5817−1050

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local

Sales Representative