Towitek TWT2021 Universal-RFID-Antenna C-Control TWT2021 Data Sheet
Product codes
TWT2021
Technical Data
TowiTek Universal RFID-Antenne
Dimensions of the antenna:
50 x 50 x 5mm, 1,5 m cable length
Power requirements
3,3 – 5V DC (20mA max)
data interface:
seriell TTL, 9600bps / 8N1
ambient temperature:
0°C .... 40°C (no condensing moisture)
RFID frequency:
125kHz
transponder compatibility:
TowiTek transponders
EM410x compatible ROM transponders
EM410x compatible ROM transponders
Disposal after end of using life for this product
Electronic devices of all kinds must not be disposed thru regular
household waste disposal but should be turned in to a collection
household waste disposal but should be turned in to a collection
point for proper recycling. Please check with your local
requirements.
Limited Warranty
This product was designed and manufactured with great care and comes with a
warranty against material or manufacturing defects at time of purchase. This
warranty is valid for 24 months starting with the day of purchase and can be claimed
with original sales receipt. The warraty of TowiTek is limited to cost free repairing or
replacement of the defective unit. Expenses and risk of transportation; compensation
for installation and de-installation and all other expenses which may be related to the
for installation and de-installation and all other expenses which may be related to the
repair or exchange of this product are not refunded by TowiTek. The liability for
consequential damages resulting from the use of this product – no matter of which
exact kind – is generally ruled out.
TowiTek
Universal RFID-Antenna
for C-Control
Nr. 19 15 53
User Manual
www.conrad.com
Thank you for purchasing this product of TowiTek!
This user guide contains many important instructions on
safe and proper use of this product. The purpose of this
user guide is to make sure you always will get best
performance andan reliable operation of your new product.
PLEASE FULLY READ THIS USER GUIDE!
The handling of products operating with electric current requires you to
follow the rules from VDE such as VDE 0100, VDE0550/0551, VDE 0700,
VDE 0711 and VDE 0860 or other local rules in your country.
follow the rules from VDE such as VDE 0100, VDE0550/0551, VDE 0700,
VDE 0711 and VDE 0860 or other local rules in your country.
•
TowiTek modules are not designed and authorized for use in life support
or life saving applications! Do not use the product for applications in
which a temporary or permanent failure or malfunction could cause
damage to persons or propery.
or life saving applications! Do not use the product for applications in
which a temporary or permanent failure or malfunction could cause
damage to persons or propery.
•
If the module is used to switch currents greater 24V it is necessary to
have the installation done with no voltage applied and performed by a
trained professional authorized for such work. The module may only be
used in such application if it was installed in a safe to touch enclosure.
have the installation done with no voltage applied and performed by a
trained professional authorized for such work. The module may only be
used in such application if it was installed in a safe to touch enclosure.
•
The module must only be used in dry and clean environment. The use
near water, heavy dirt and/or high humidity is dangerous and not
permitted.
near water, heavy dirt and/or high humidity is dangerous and not
permitted.
•
The product must not be used in conjunction with any type of flammable
liquid or gas or other environment with risk of spark triggered
explosions.
liquid or gas or other environment with risk of spark triggered
explosions.
•
Never exceed the limits or ratings listed in the 'Technical Data' section at
the end of this user guide.
the end of this user guide.
•
If the module is used in schools or educational facilities or similar
institutions the operation must be supervised by trained and authorized
staff.
institutions the operation must be supervised by trained and authorized
staff.
•
The product itself and all parts thereof (including packing material) are
not suitable toys for childern! (choking hazard, risk of electric shock, ...)
Intended use for this product
The TowiTek universal RFID antenna detects and reads the ROM ID-
Signature of passive transponders. The decoded and validated data is
transmitted via a TTL compatible serial interface for easy processing by
another data processing system.
Signature of passive transponders. The decoded and validated data is
transmitted via a TTL compatible serial interface for easy processing by
another data processing system.
Special features of the RFID-Antenna
•
compatible with TowiTek and EM410x ROM transponders (64/40 Bit)
•
compact size
•
low power consumption
•
cost efficient and reliable RFID reader for many applications
Operational instructions
Pin assignment on the connection cable
The three inner wires of the connection cable are color coded and
assigned as follows:
assigned as follows:
blue
supply voltage 0V (GND)
red
supply voltage 3.3 – 5 V (VCC)
yellos
serial data output
Important notice: High frequency noise (ripple) on the power supply can
reduce the reading range of the antenna.
reduce the reading range of the antenna.