STMicroelectronics 100 W transition-mode PFC pre-regulator with the L6563S EVL6563S-100W EVL6563S-100W Data Sheet
Product codes
EVL6563S-100W
PFC coil specifications
AN3065
30/33
Doc ID 16279 Rev 2
7.4 Winding
characteristics
7.5
Mechanical aspect and pin numbering
●
Maximum height from PCB: 21.5 mm
●
Coil former type: vertical, 6+6 pins
●
TDK P/N: BPQ26/20-1112CP
●
Pins #1, 2, 4, 6, 7, 10, 12 are removed - pin 8 is for polarity key
●
External copper shield: not insulated, wound around the ferrite core, including the coil
former. It must be well adhered to the ferrite. Height is 8 mm. Connected to pin #3 by a
soldered, solid wire.
former. It must be well adhered to the ferrite. Height is 8 mm. Connected to pin #3 by a
soldered, solid wire.
Figure 40.
Top view
7.6 Unit
identification
●
Manufacturer: TDK
●
Manufacturer P/N: SRW2620PQ-X22V102
Table 2.
Winding characteristics
Pins
Winding
RMS current
Number of turns
Wire type
5 - 9
Primary
(1)
1.
Primary winding external insulation: 2 layers of polyester tape
1.4 A
RMS
57.5 - fit
Multi stranded
#7 x
φ 0.20 mm
11 - 3
Aux
(2)
2.
Aux winding is wound on top of primary winding. External insulation with 2 layers of polyester tape
5.5 spaced
5.5 - spaced
φ 0.28 mm
!-V