Taskit ARM9 CPU-module with Linux Stamp9261-series Stamp9261 (64F/64R) 542310 Data Sheet
Product codes
542310
5. Stamp9261 Starter Kit
5.1. Starter Kit Contents
The Stamp9261 starter kit contains the following components:
-
Stamp9261
Stamp9261 Adaptor: Adapter board for connecting Stamp9261 and Stamp9261 Base
-
Panel-Card EVB: Evaluation and Prototyping Board
-
Wall Adapter Power Supply, Input AC 230V, Output DC 9 to 16V, min. 400 mA
-
Serial "Null-Modem" Cable with two 9-pin D-type Connectors
-
Adapter cable for accessing the Debug UART
-
CD with Operating System, Toolchain, and Documentation
5.2. Panel-Card EVB
The Panel-Card EVB is designed to be both simple and universal. Some elements of the circuit board
will not always be needed, but facilitate implementation for certain purposes. It was designed to serve
both, the Panel-Card and the Stamp9261 as an evaluation platform.
will not always be needed, but facilitate implementation for certain purposes. It was designed to serve
both, the Panel-Card and the Stamp9261 as an evaluation platform.
a) First Steps
The Starter Kit board "Panel-Card EVB" makes it easy to put the Stamp9261 to use. The first steps
involve the following:
The Starter Kit board "Panel-Card EVB" makes it easy to put the Stamp9261 to use. The first steps
involve the following:
-
connecting the wall adapter to the main supply
-
connecting the DBGU-Adapter and the serial cable to a COM port of a PC
-
starting a terminal program for the selected COM port at 115200 baud, 8N1
-
starting the Stamp9261 by connecting the DC plug of the wall adapter.
Boot messages of the Stamp9261 are now expected to appear on the terminal.
b) Power Supply
From an unregulated input voltage between 8 and 35V, two voltages are produced:
From an unregulated input voltage between 8 and 35V, two voltages are produced:
-
3.3V for the CPU module,
-
5V for USB and optional peripherals,
c) RS232 Interface
The RS232 port provides RS232 drivers/receivers for the RxD, TxD, RTS, CTS, RI and DCD signals of
the USART1 of the Stamp9261. Instead of the usual DTR and DSR signals, the connector integrates
the RxD and TxD lines of the Stamp9261's "Debug UART". To use the console port of the Stamp9261,
which usually is identical to the Debug UART, the "DBGU adapter" has to be used. It connects the
PC's TxD, RxD, and Ground lines to the appropriate pins of the DSUB-9 connector of the Stamp9261
Base.
The RS232 port provides RS232 drivers/receivers for the RxD, TxD, RTS, CTS, RI and DCD signals of
the USART1 of the Stamp9261. Instead of the usual DTR and DSR signals, the connector integrates
the RxD and TxD lines of the Stamp9261's "Debug UART". To use the console port of the Stamp9261,
which usually is identical to the Debug UART, the "DBGU adapter" has to be used. It connects the
PC's TxD, RxD, and Ground lines to the appropriate pins of the DSUB-9 connector of the Stamp9261
Base.
d) Connectors
The following connectors are part of the Panel-Card EVB:
The following connectors are part of the Panel-Card EVB:
-
Stamp9261 Adaptor slot, consisting of two 40-pin header connectors (0.1 inch pitch)
-
Ethernet 10/100 MBit
-
USB Host (dual)
-
USB Device
-
RS232
-
MMC-Card Slot
- 28 -