STMicroelectronics VND5E160AJ Evaluation Board EV-VND5E160AJ EV-VND5E160AJ Data Sheet
Product codes
EV-VND5E160AJ
This is information on a product in full production. For further information contact your local STMicroelectronics sales
office.
office.
September 2013
Doc ID 023959 Rev 2
1/8
1
EV-VND5E160AJ
VND5E160AJ evaluation board
Data brief
−
production data
Features
■
Simple single IC application board dedicated
for VND5E160AJ-E
for VND5E160AJ-E
■
Provides thermal heat-sinking for ease of use
in prototyping.
in prototyping.
■
Provides electrical connectivity for easy
prototyping
prototyping
Description
EV-VND5E160AJ provides you an easy way to
connect ST’s surface mounted VIPower
connect ST’s surface mounted VIPower
®
drivers
into your existing prototype circuitry. This
evaluation board comes pre-assembled with
VND5E160AJ-E high-side driver.
evaluation board comes pre-assembled with
VND5E160AJ-E high-side driver.
The VND5E160AJ-E is a double channel high-
side driver manufactured using ST proprietary
VIPower M0-5 technology and housed in
PowerSSO-12 package. The VND5E160AJ-E is
designed to drive 12V automotive grounded
loads, providing protection, diagnostics and easy
3 V and 5 V CMOS-compatible interface with any
microcontroller.
side driver manufactured using ST proprietary
VIPower M0-5 technology and housed in
PowerSSO-12 package. The VND5E160AJ-E is
designed to drive 12V automotive grounded
loads, providing protection, diagnostics and easy
3 V and 5 V CMOS-compatible interface with any
microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shut-off with auto-
restart and overvoltage active clamp. A dedicated
analog current sense pin is associated with every
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shut-off with auto-
restart and overvoltage active clamp. A dedicated
analog current sense pin is associated with every
output channel provides enhanced diagnostic
functions including fast detection of overload and
short-circuit to ground through power limitation
indication, overtemperature indication, short-
circuit to V
functions including fast detection of overload and
short-circuit to ground through power limitation
indication, overtemperature indication, short-
circuit to V
CC
diagnosis and ON-state and
OFF-state open-load detection.
The current sensing and diagnostic feedback of
the whole device can be disabled by pulling the
CS_DIS pin high to share the external sense
resistor with similar devices.
the whole device can be disabled by pulling the
CS_DIS pin high to share the external sense
resistor with similar devices.
Figure 1.
VND5E160AJ evaluation board
Parameter
Symbol
Value
Unit
Max supply voltage
V
CC
41
V
Operating voltage range
V
CC
4.5 to 28
V
Max On-State resistance
R
ON
160
m
Ω
Current limitation (typ)
I
LIMH
10
A
Off state supply current
I
S
2
µA
(1)
1.
Typical value with all loads connected.
Table 1.
Device summary
Order code
Reference
EV-VND5E160AJ
VND5E160AJ evaluation board