STMicroelectronics VN5016AJ Evaluation Board EV-VN5016AJ EV-VN5016AJ Data Sheet
Product codes
EV-VN5016AJ
This is information on a product in full production. For further information contact your local STMicroelectronics sales
office.
office.
September 2013
Doc ID 023957 Rev 2
1/8
1
EV-VN5016AJ
VN5016AJ evaluation board
Data brief
−
production data
Features
■
Simple single IC application board dedicated
for VN5016AJ-E
for VN5016AJ-E
■
Provides thermal heat-sinking for ease of use
in prototyping
in prototyping
■
Provides electrical connectivity for easy
prototyping
prototyping
Description
EV-VN5016AJ provides you an easy way to
connect ST’s surface mounted VIPower
connect ST’s surface mounted VIPower
®
drivers
into your existing prototype circuitry. This
evaluation board comes pre-assembled with
VN5016AJ-E high-side driver.
evaluation board comes pre-assembled with
VN5016AJ-E high-side driver.
The VN5016AJ-E is a monolithic device made
using STMicroelectronics
using STMicroelectronics
®
VIPower
®
M0-5
technology. It is intended for driving resistive or
inductive loads with one side connected to
ground.
inductive loads with one side connected to
ground.
Active V
CC
pin voltage clamp protects the device
against low energy spikes. This device integrates
an analog current sense which delivers a current
proportional to the load current (according to a
known ratio) when CS_DIS is driven low or left
open. When CS_DIS is driven high, the
CURRENT SENSE pin is in a high impedance
condition.
an analog current sense which delivers a current
proportional to the load current (according to a
known ratio) when CS_DIS is driven low or left
open. When CS_DIS is driven high, the
CURRENT SENSE pin is in a high impedance
condition.
Output current limitation protects the device in
overload condition. In case of long overload
duration, the device limits the dissipated power to
safe level up to thermal shutdown intervention.
Thermal shutdown with automatic restart allows
the device to recover normal operation as soon as
fault condition disappears.
overload condition. In case of long overload
duration, the device limits the dissipated power to
safe level up to thermal shutdown intervention.
Thermal shutdown with automatic restart allows
the device to recover normal operation as soon as
fault condition disappears.
Figure 1.
VN5016AJ evaluation board
Parameter
Symbol
Value
Unit
Max supply voltage
V
CC
41
V
Operating voltage range
V
CC
4.5 to 36
V
Max On-State resistance
R
ON
16 m
Ω
Current limitation (typ)
I
LIMH
65 A
Off state supply current
I
S
2 µA
(1)
1.
Typical value with all loads connected.
Table 1.
Device summary
Order code
Reference
EV-VN5016AJ
VN5016AJ evaluation board