Ixys KXOB22-12X1 KXOB22-12X1L Data Sheet
Product codes
KXOB22-12X1L
IXYS reserves the right to change limits, test conditions and dimensions © 2010 IXYS All rights reserved
IXYS KOREA LTD.
1
IXYS Corporation
906-5 Iui-dong, Yeongtong-Gu, Suwon, Gyeonggi-Do (Korea) 1590 Buckeye Drive, Milpitas, CA 95035-7418
Phone +82-70-7113-0300, Fax +82-70-7113-0301 Rev. Jan. 2014 Phone (408) 457-9000, Fax 408-496-0670
Phone +82-70-7113-0300, Fax +82-70-7113-0301 Rev. Jan. 2014 Phone (408) 457-9000, Fax 408-496-0670
IXOLAR
TM
High Efficiency SolarBIT.
Description
IXOLAR
TM
SolarBITs are IXYS’ product line of SolarBITs made of monocrystalline, high efficiency solar
cells. The IXOLAR
TM
SolarBITs is an ideal for charging various battery powered and handheld consumer
products such as mobile phones, cameras, PDAs, MP3-Players and toys. They are also suitable for
industrial applications such as wireless sensors, portable instrumentation and for charging emergency
backup batteries.
With a cell efficiency of typically 22% measured at a wafer level, SolarBITs give the ability to extend run
time even in "low light" conditions and increase battery life and run time in a small footprint, which can be
easily accommodated in the design of Portable Products. The design allows connecting SolarBITs flexibly in
series and/or parallel to perfectly meet the application’s power requirements.
IXOLAR
TM
products have a very good response over a wide wavelength range and therefore can be used in
both indoor and outdoor applications.
Product and Ordering Information (Measured in Package)
(parameters given are typical values)
Dimensions (L x W x H): 22 x 7 x 1.8 [mm]
SolarBITs Weight: 0.5 grams
SolarBITs are compliant to the RoHS Norm.
Dimensions (L x W x H): 22 x 7 x 1.8 [mm]
SolarBITs Weight: 0.5 grams
SolarBITs are compliant to the RoHS Norm.
KXOB22-12X1 Electrical Characteristics (Measured in Package)
Symbol
Cell Parameter
Typical
Ratings *
Units
V
OC
open circuit voltage
630
mV
J
SC
short circuit current density
42.4
mA/cm
2
V
mpp
voltage at max. power point
501
mV
J
mpp
current density at max. power point
37.2
mA/cm
2
P
mpp
maximum peak power
18.6
mW/cm
2
FF
fill factor
> 70
%
η
solar cell efficiency
22
%
Δ
V
OC
/ΔT
open circuit voltage temp. coefficient
-2.1
mV/K
Δ
J
SC
/ΔT
short circuit current temp. coefficient 0.12
mA/(cm²K)
* All values measured at Standard Condition: 1 sun (= 100 mW/cm²), Air Mass 1.5, 25°C
Part Number
Open Circuit
Voltage [V]
Short Circuit
Current [mA]
Typ. Voltage
@ P
mpp
[V]
Typ. Current
@ P
mpp
[mA]
KXOB22-12X1F 0.63
50.0
0.50
44.6
Features
• Monocrystalline silicon technology
• High efficiency outdoor and indoor
• Long life and stable output
• Sealed Package
• High mechanical robustness
• Surface Mount Package
• Reflow Solderable
Applications
• Battery chargers for portables such as cell
phones, PDAs, GPS-Systems, …
• “Green” electricity generation
• Power backup for UPS, Sensors, Wearables
Advantages
• Automatic Pick & Place Mounting
• One Product for Multiple Applications
• Flexible Integration into the Application