STMicroelectronics Multiple-device temperature sensor and RTC demonstration board based on the STM32 STEVAL-IFS017V1 STEVAL-IFS017V1 Data Sheet

Product codes
STEVAL-IFS017V1
Page of 46
November 2012
Doc ID 023106 Rev 1
1/46
UM1539
User manual
STEVAL-IFS017V1 multi device temperature
sensor and RTC demo
Introduction
This document explains the functioning of the multiple temperature sensors and RTC demo 
which is based on a motherboard and daughter card approach. The complete system 
consists of one motherboard having an STM32F102xx microcontroller and different 
daughter cards having a temperature sensor and RTC. The temperature sensors supported 
by this system are:
STLM20
STTS424E02
STTS75
STDS75
STLM75
STCN75
STTS751
STTS2002
RTCs supported by this system are:
M41T82SM6
M41T83SQA6
M41T83SMY6
This board operates in USB powered mode with a graphical user interface (GUI). The 
graphical user interface is used to access the registers and demonstrate the features of 
temperature sensors and RTCs.
Figure 1.
STM32F102xx based motherboard for temperature sensor and RTC
AM12154v1
Temperature sensor 
address selection switches
Status LED`s
CN5 and CN6 for selecting
daughter card power supply
3.3 V
Therm O/P for STTS751
GND
USB connector
Daughter card
connector