Conrad Energy (1.06.165) 1.06.165 Data Sheet
Product codes
1.06.165
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 1232060
Material Safety Data Sheet
Page 4 of 10
7. Handling and Storage
Handling:
Information for safe handling:
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of dust.
Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Storage:
Requirements to be met by storerooms and receptacles:
Store in a cool location.
Information about storage in one common storage facility:
Store away from flammable substances.
Do not store together with oxidizing and acidic materials.
Further information about storage conditions:
Keep receptacle tightly sealed. Store in cool, dry conditions in well sealed receptacles. Protect from heat and direct sunlight.
8. Exposure Controls/Personal Protection
Additional information about design of technical systems: No further data; see item 7.
Components with limit values that require monitoring at the workplace:
7440-44-0 carbon
Great Britain (WEL)
Long Term Value = 10*4** mg/m3 * = inhalable dust ** = respirable
Ireland (OELV)
Long Term Value = 10*4** mg/m3 * = inhalable ** = respirable dust
Additional information:
The lists that were valid during the creation were used as basis.
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing. Wash hands
before breaks and at the end of work. Avoid contact with the skin. Avoid contact with the eyes and skin.
before breaks and at the end of work. Avoid contact with the skin. Avoid contact with the eyes and skin.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory
protective device that is independent of circulating air.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no
recommendation to the glove material can be given for the product/ the preparation/the chemical mixture. Selection of the
glove material on consideration of the penetration times, rates of diffusion and the degradation.