Robbe Arcus 1-2592 Data Sheet
Product codes
1-2592
Building and Operating Instructions Arcus V-Tail EDF
No. 2592
2
Contents
Page
Specification 2
Essential accessories
2
Recommended accessories
2
Set contents
2
Radio control system
3
Colour scheme
3
Glued joints
3
Power system
3
Installing the tail panels
4, 5
Installing the wings
5
Installing the RC system components
6
Control surface travels
6
Centre of Gravity
6
Checking the working systems,
setting up the control surfaces
7
Test-flying, flying notes
7
Specification, 20 A speed controller
8
Programmable settings
8
The speed controller in use
8
Setting the throttle travel
8
Normal procedure when flying
8
Protective functions
8
Programming the speed controller
8
1. Starting programming mode
8
2. Selecting the programming point
8
3. Setting the programming point (value)
8
4. Quitting programming mode
8
Safety Information
8
Replacement Parts list
9
Guarantee 9
Service Centre addresses
10
Conformity Declaration
10
Dear customer,
Congratulations on your choice of a factory-assembled mo-
del aircraft from the robbe
Modellsport range. Many thanks for placing your trust in us.
del aircraft from the robbe
Modellsport range. Many thanks for placing your trust in us.
The model can be ready for the air when you have completed
just a few simple procedures.
Please read right through these instructions and the separate
information sheets before attempting to assemble and fly the
model, as this will make it much easier to complete the tasks
required.
just a few simple procedures.
Please read right through these instructions and the separate
information sheets before attempting to assemble and fly the
model, as this will make it much easier to complete the tasks
required.
Please study the illustrations and the brief instructions
to obtain a clear understanding of the individual stages of
construction. All parts must be trial-fitted “dry” (without glue)
before you reach for the glue. Assign the individual compon-
ents to the various stages of assembly.
to obtain a clear understanding of the individual stages of
construction. All parts must be trial-fitted “dry” (without glue)
before you reach for the glue. Assign the individual compon-
ents to the various stages of assembly.
All directions, such as “right-hand”, are as seen from the tail
of the model, looking forward.
of the model, looking forward.
We constantly strive to update our products to reflect the la-
test developments. You can find details of technical improve-
ments and revised documentation on the Internet by calling
up the appropriate product description at our website: www.
robbe.com.
test developments. You can find details of technical improve-
ments and revised documentation on the Internet by calling
up the appropriate product description at our website: www.
robbe.com.
The model
Not an everyday model; not just like all the others!
That's the Arcus V-tail EDF.
That's the Arcus V-tail EDF.
A compact model glider with the characteristic sound of an
EDF model jet. The model is equally suitable for the expe-
rienced pilot as well as the advanced beginner who is looking
for an EDF trainer, or simply fancies flying something rather
different for once.
The design and look of the Arcus V-Tail EDF are just as ex-
clusive as its power system.
The model can also be fitted with an optional rudder servo.
EDF model jet. The model is equally suitable for the expe-
rienced pilot as well as the advanced beginner who is looking
for an EDF trainer, or simply fancies flying something rather
different for once.
The design and look of the Arcus V-Tail EDF are just as ex-
clusive as its power system.
The model can also be fitted with an optional rudder servo.
Specification:
Wing loading approx.:
33.3 g/dm2
Length approx.:
770 mm
Total surface area approx.:
15 dm2
All-up weight approx.:
500 g
Wingspan approx.:
1400 mm
RC functions:
Elevator, ailerons, throttle
Optional: Rudder
Optional: Rudder
Essential accessories:
ROXXY
®
POWER ZY 3S 1300mAh 30C
6913
T6J-R2006GS 2.4 GHz FHSS
F4100
T-socket pack of 10
8895
Recommended accessories:
Charge lead, T-plug
8881
POWER PEAK
®
A4 EQ-LCD 230V/12V
8560
Optional:
1x Servo 8.1 g
8975
Set contents:
• EPO foam fuselage, tail and wing with applied decals
• Finished canopy
• Control surface linkage hardware pack
• Assembled Ø 50 mm Fan unit with Brushless-Motor and
• Finished canopy
• Control surface linkage hardware pack
• Assembled Ø 50 mm Fan unit with Brushless-Motor and
robbe E-COLINE controller
• 3 factory-installed robbe E-COLINE 8G servos
• Multi-lingual illustrated assembly instructions
• Multi-lingual illustrated assembly instructions