Sony DVP-FX720 DVP-FX720LSVI.YNL User Manual

“Audio Setup” allows you to set the 
sound according to the playback and 
connection conditions.

Select “Audio Setup” in the Setup 
Display. To use the display, see “Using 
the Setup Display” (page 40).
The default settings are underlined.

◆ Audio DRC (Dynamic Range 
Control) (DVD only)

Makes the sound clear when the volume 
is turned down when playing a DVD that 
conforms to “Audio DRC.” 
This function affects the output from the 
following jacks:
– AUDIO jack
– OPTICAL OUT jack only when 

“Dolby Digital” is set to “Downmix 
PCM” (page 43).

◆ Digital Output

Selects if audio signals are output via the 
OPTICAL OUT jack.

Switches the method of outputting audio 
signals when you connect an audio 
equipment such as an AV amplifier 
(receiver) with the OPTICAL OUT jack.
For connection details, see page 48.
After setting “Digital Output” to “On,” 
select “Dolby Digital” and “DTS.”
If you connect a component that is 
incompatible with the selected audio 
signal, a loud noise (or no sound) may be 
heard from the speakers, damaging your 
ears or speakers.

◆ Dolby Digital (DVD only)

Selects the type of Dolby Digital signal.

On

Makes low sounds clear 
even if you turn the 
volume down.

Off

Normally select this 
position.

ENTER

RETURN

Audio Setup

Audio DRC

Digital Output

Off

On

Select:

Cancel:

On

Normally select this 
position. When you select 
“On,” see “Setting the 
digital output signal” for 
further settings.

Off

The influence of the digital 
circuit upon the analog 
circuit is minimal.

Downmix 
PCM

Select this when the player 
is connected to an audio 
component without a built-
in Dolby Digital decoder.

Dolby Digital Select this when the player 

is connected to an audio 
component with a built-in 
Dolby Digital decoder.

,continued