Ldt Adap-HSI-s88-N Data Sheet

ittfinski 

aten

echnik (

)

 

Operation Instruction  

 

 

                                                                                

 

 

 

 
 
 

With the Adapter Adap-HSI-s88-N  is it possible to 
connect s88-Feedback Modules such as RM-88-N, 
RM-88-N-O and RM-GB-8-N  directly by use of the  
screened  Patch-Cable  to the  Interfaces HSI-88, 
HSI-88-USB  and DiCoStation  in accordance to 

. 

This product is not a toy! Not suitable for children under 14 years of age! The kit 
contains small parts, which should be kept away from children under 3! Improper 
use will imply danger or injuring due to sharp edges and tips! Please store this 
instruction carefully. 
 
 

 

 
 
 
 

 
 
 
 
 
 
 
 
 
 
 

Introduction/Safety Instruction: 

 

You have purchased the 

Adap-HSI-s88-N that is supplied within the assortment of 
Littfinski DatenTechnik (LDT). 

 

We wish you having a good time using this product. 

 
 

• 

Please read the following instructions carefully. Warranty will 
expire due to damages caused by disregarding the operating 
instructions. LDT will also be not liable for any consequential 
damages caused by improper use or installation. 

 
The adapter comes with a 24 month warranty. 

 

Connecting the Adapter to the Interfaces 
HSI-88, HSI-88-USB or DiCoStation: 

 

 

• 

 

Connect the  three 6-poles socket bars of the adapter Adap-
HSI-s88-N to the three 6-poles pin bars of the Interfaces HSI-
88, HSI-88-USB or the DiCoStation.  
 
Please attend careful that there is no offset between the 
position of the socket bars and the pin bars. 
 
For the  three s88-buslines are now  RJ-45 Sockets available 

for realizing 

 s88-bus connections to the feedback 

modules by using screened Patch-Cables. 
 

The  PC-board of the adapter Adap-HSI-s88-N contains three 
RJ-45 sockets for  three s88-buslines marked with „Left“, 
„Middle“ and „Right“ for the left, middle and right bus lines to 
the feedback modules. 

Schnelles Computer-Interface für den s88 Rück-
meldebus. Ermöglicht drei s88 Rückmeldestränge.

Littfinski DatenTechnik  (LDT)

USB

ST1

LED1

LED2

STOP

GO

ST6

EXT-PORT

BOOSTER

ST2

Littfinski DatenTechnik

D-25492 Heist

DiCoStation

Rev.  1.0 

 

s88 Rückmeldebus

s88 feedback  bus

Software by

everytime up-to-date

14..18V~

br.    gelb

LEFT

MIDDLE

RIGHT

Littfinski DatenTechnik (LDT)

Adap-HSI-s88-N     Rev. 1.0

SolderSide

 

 
 

 

The draft shows the High Speed Interface HSI-88-USB with 

connected Adapter Adap-HSI-s88-N. 

 

 

 
 
Further LDT-Products from the  Digital-
Professional-Series: 

 

 

4-fold turnout decoder for four outputs and with free 
programmable decoder address. With possible external power 
supply. 

 

4-fold switch decoder with four bi-stable relays of 4A switching 
current each and free programmable decoder address. 

 

against ground) for the s88-standard connection and 

.

 

 

16-fold feedback module with galvanic separated opto 
coupling inputs for high interference protection and for 
potential separation. 

For s88-Standard Connection and

 

.

 

 

8-fold feedback module with 8 integrated track occupancy 
detectors for a max. current load of 3 Ampere (peak current 

of up to 7 Ampere) for s88-standard connection and 

. 

All components are available as easy to assemble  complete 
kits as finished modules or as finished modules in a case.