Toolcraft 51-01055-01 Data Sheet
English
Multi-Timer
4. Operation overview
The Multi-Timer has 4 outputs to control downstream circuits. In order
to release the switching operations, the contacts of the 4 related
switching inputs have to be closed. The switching duration can be set
via trim-pots individually for the different switching operations.
There are four different modes of operation available:
when used in analogue or digital layouts:
1. time switch,
2. pulse delay,
3. random switch;
when used in analogue layouts:
4. start-brake-stopover switch.
The mode of operation has to be set by means of jumpers. The
operation modes 1 and 2 are set to the 4 outputs of the Multi-Timer
individually. Thus using one Multi-Timer as a combined time switch and
pulse delay is possible. When using one Multi-Timer as a ramdom
switch or a start-brake-stopover switch, the setting is effective for the
whole module.
The Multi-Timer works like a switch and does not provide current for
the operation of downstream circuits at it´s outputs. Therefore the
downstream circuits have to be provided externally with current. It is
possible to use d.c. as well as a.c. voltage for the power supply.
to release the switching operations, the contacts of the 4 related
switching inputs have to be closed. The switching duration can be set
via trim-pots individually for the different switching operations.
There are four different modes of operation available:
when used in analogue or digital layouts:
1. time switch,
2. pulse delay,
3. random switch;
when used in analogue layouts:
4. start-brake-stopover switch.
The mode of operation has to be set by means of jumpers. The
operation modes 1 and 2 are set to the 4 outputs of the Multi-Timer
individually. Thus using one Multi-Timer as a combined time switch and
pulse delay is possible. When using one Multi-Timer as a ramdom
switch or a start-brake-stopover switch, the setting is effective for the
whole module.
The Multi-Timer works like a switch and does not provide current for
the operation of downstream circuits at it´s outputs. Therefore the
downstream circuits have to be provided externally with current. It is
possible to use d.c. as well as a.c. voltage for the power supply.
Operation mode 1 "Time Switch"
The activating time has to be set individually at a trim-pot for each
output. The maximum activating time is 4,5 minutes.
After the closure of the contacts of a switching input the related output
is switched on for the set time. In order to release a switching pulse
push-buttons or comparable external circuits can be used.
The activating time has to be set individually at a trim-pot for each
output. The maximum activating time is 4,5 minutes.
After the closure of the contacts of a switching input the related output
is switched on for the set time. In order to release a switching pulse
push-buttons or comparable external circuits can be used.
Page 38
tams
elektronik