Uhlenbrock 65100 Intellibox II DCC System 65100 Data Sheet
![Uhlenbrock](https://files.manualsbrain.com/attachments/b98959370c0e0a60faf10158523778b2762d152a/common/fit/150/50/82a0e9f4c88f1cddd4704aa2938bbc062a5de9dbc15f58b94fe7875ac898/brand_logo.gif)
Product codes
65100
Intellibox II
117
9.3 The Display in LISSY Mode
If LISSY Mode is selected the middle part of the display shows the messages from four
LISSY Receivers:
LISSY Receivers:
In each of the four fields, in 4 rows the following is displayed:
• Name of the monitored LISSY receiver
• Address of the LISSY receiver, direction and train’s measured speed
• Locomotive name or address of the detected locomotive
• Name or Number of the recognized train category
So that the LISSY receiver, the locomotive and the train category are displayed by name, a
name must have been assigned to the receiver, locomotive and the train category. The
assignment of a name to a LISSY receiver and the train category is outlined in Chapter 9.6,
for assignment of a name to a locomotive address see Chapter 5.6.5.
name must have been assigned to the receiver, locomotive and the train category. The
assignment of a name to a LISSY receiver and the train category is outlined in Chapter 9.6,
for assignment of a name to a locomotive address see Chapter 5.6.5.
9.4 Selecting the Displayed Group
In LISSY Mode a group of 4 LISSY receivers displayed. These groups of 4 receivers can
be freely defined and assigned a name. The [menu]-key is used to call up the LISSY Menu
and a different group can be selected to be displayed.
be freely defined and assigned a name. The [menu]-key is used to call up the LISSY Menu
and a different group can be selected to be displayed.
Procedure:
Step 1