Uhlenbrock 65100 Intellibox II DCC System 65100 Data Sheet

 

The Intellibox II can be attached to another LocoNet center (Intellibox IR, Intellibox Basic or 
Twin-Center) as an auxiliary device. 

In the "Accessory Equipment" mode of operation the following functions are available: 

•  Operating Panel with all database functions 
•  Booster with 3A for an isolated section of track 
•  Route Memory for an additional 80 routes 
•  LocoNet Power Feed on LocoNet-T output for further LocoNet module without their own 

power supply, e.g. feedback modules, hand controllers 

•  s88-feedback input 
•  DCC Booster output 
•  USB-LocoNet Interface 

The Intellibox II is set to the layout as accessory equipment, when special option 844 is set 
to value 1. 

Important:  To set the operating mode to "Accessory Equipment" the Intellibox is only 
allowed to be connected to its power transformer.  No LocoNet connection to another 
Intellibox is allowed during this procedure.   Only after changing the special option and 
restart of the Intellibox II is the interconnection permitted. 

•  Press the m key 
•  Press the M key 
•  Scroll with the D key until you read “Special Options” 
•  Enter the menu with the R key 
•  With the numeric keys enter the number of the special option (here 844)  
•  Press the R key to move to the right section 
•  Enter the desired value (here 1) 
•  Press E-key to confirm the selection 
•  Press the m key to return to driving mode 

The rails of the isolated track section are connected to terminals 3 and 4 of socket 1. 

The auxiliary device has its own transformer, which is attached to terminals 5 and 6. 

The LocoNet B socket of the accessory equipment is connected with the LocoNet B socket 
of the center. 

For connection with the center a non-crossed LocoNet cable must be used. For this 
Uhlenbrock LocoNet cables 62015, 62025, 62045 and 62065 are available.