Uhlenbrock 65100 Intellibox II DCC System 65100 Data Sheet
Product codes
65100
Intellibox II
34
4.7 “Programming Track” Menu
It is possible to select whether the connections for the programming track provides only
programming power or if the output automatically switches between normal digital power
and programming power.
programming power or if the output automatically switches between normal digital power
and programming power.
Only Programming Track
There is no power on the programming track output, it is only fed with programming power
during read and write operations.
There is no power on the programming track output, it is only fed with programming power
during read and write operations.
Automatic
During normal running the programming track output provides normal digital power. It is
automatically switched over to programming track power as soon as the Programming
Menu is selected. That way a model railway layout can setup a siding to be the
programming track and also a normal siding.
During normal running the programming track output provides normal digital power. It is
automatically switched over to programming track power as soon as the Programming
Menu is selected. That way a model railway layout can setup a siding to be the
programming track and also a normal siding.
Very important: The track segment must be isolated on both sides. It must not have any
electrical connection with the rest of the layout and must be exclusively provided with
power from the programming track output. The isolations must not be bridged by a vehicle
during programming operations (bogie, lit wagon).
electrical connection with the rest of the layout and must be exclusively provided with
power from the programming track output. The isolations must not be bridged by a vehicle
during programming operations (bogie, lit wagon).
The preset value for the programming track is “automatic”.
Procedure:
Step 1
Step 2
Step 1
Step 2