Uhlenbrock 65100 Intellibox II DCC System 65100 Data Sheet
Product codes
65100
Intellibox II
55
Step 5
While the “All Functions” Menu is open the locomotive can be controlled by the controller
as normal. The locomotive speed and direction are shown in the display
as normal. The locomotive speed and direction are shown in the display
.
5.6.4 Dispatching Locomotives
If a vehicle that is being controlled by an Intellibox II controller is to be taken over by a
controller which does not have the capability of entering the locomotive address (e.g.
FRED hand controller from Uhlenbrock, BT-2 hand controller from Digitrax) the locomotive
address must be placed into the dispatch buffer. After that the Hand controllers without an
address input can take over the address. The manual for the particular Hand controller will
describe the key combination is used to take over the address from the Intellibox II, after it
has been “dispatched”.
If a vehicle that is being controlled by an Intellibox II controller is to be taken over by a
controller which does not have the capability of entering the locomotive address (e.g.
FRED hand controller from Uhlenbrock, BT-2 hand controller from Digitrax) the locomotive
address must be placed into the dispatch buffer. After that the Hand controllers without an
address input can take over the address. The manual for the particular Hand controller will
describe the key combination is used to take over the address from the Intellibox II, after it
has been “dispatched”.
Procedure:
Step 1