Uhlenbrock 65100 Intellibox II DCC System 65100 Data Sheet
Product codes
65100
Intellibox II
66
Step 4
Step 5
5.6.6 FRED Hand Controller
With the Intellibox II up to 16 FREDs (digital Hand controller from Uhlenbrock) in extended
in Mode (Controlling of up to four locomotives) can be operated. Additional FREDs can be
connected in dispatch mode (Control of one locomotive) (see Chapter 5.6.4).
In the factory setting the Hand controller is configured so that on the Intellibox it can be
operated in extended mode.
The FRED Hand Controller Number
As soon as the Uhlenbrock Hand controller FRED is connected to the Intellibox LocoNet
for the first time the center automatically assigns the FRED an internal Identification
number (ID). Using this hand controller number the center can forward locomotive
addresses to the FRED.
In the “Basic Setting – Hand Controller“ Menu (Chapter 4.5) the table with the individual
entered FREDs can be seen. Individual FREDs can also be deleted from the table in this
Menu.
Forwarding a Locomotive address
If the FRED is used in extended mode the FREDs individual locomotive selection keys
have the locomotive addresses forwarded in the following way:
With the Intellibox II up to 16 FREDs (digital Hand controller from Uhlenbrock) in extended
in Mode (Controlling of up to four locomotives) can be operated. Additional FREDs can be
connected in dispatch mode (Control of one locomotive) (see Chapter 5.6.4).
In the factory setting the Hand controller is configured so that on the Intellibox it can be
operated in extended mode.
The FRED Hand Controller Number
As soon as the Uhlenbrock Hand controller FRED is connected to the Intellibox LocoNet
for the first time the center automatically assigns the FRED an internal Identification
number (ID). Using this hand controller number the center can forward locomotive
addresses to the FRED.
In the “Basic Setting – Hand Controller“ Menu (Chapter 4.5) the table with the individual
entered FREDs can be seen. Individual FREDs can also be deleted from the table in this
Menu.
Forwarding a Locomotive address
If the FRED is used in extended mode the FREDs individual locomotive selection keys
have the locomotive addresses forwarded in the following way: