Mc Crypt DJ Mixer DJ-20 USB DJ-20 USB Data Sheet
Product codes
DJ-20 USB
33
Installation/Setup
The Mc Crypt DJ-Mixer can be set up on a level surface or installed in a desk.
When setting up or mounting in a desk with other equipment, ensure is sufficient ventilation.
Do not place the device on soft surfaces, e.g. a carpet or a bed etc.
Additionally, air circulation must not be obstructed by any objects such as magazines, tablecloths,
curtains etc. This prevents heat removal from the product and can lead to overheating (risk of
fire).
Do not drill any additional holes into the mixing desk housing. This may impair device safety.
Make sure that the device is set up securely positioned on a steady surface.
Should the mixer fall down, people might get injured.
When installing/setting up the device, make sure that the connection cables are not crushed or
damaged by any sharp edges.
Always install the cables so that nobody can trip over them or become entangled in them. Risk
of injury.
When selecting a place to set up the device, avoid direct, intense sunlight, vibration, dust, heat,
cold and moisture.
Make sure there are no devices with strong electric or magnetic fields such as converters, motors,
cordless telephones or radio-controlled devices in the vicinity of the mixer, as they can cause
interferences in the mixer.
Never place the device on valuable or sensitive furniture surfaces without sufficient protection.
Set-Up
• Place the device on an even surface.
• Place the device on an even surface.
Installation
• Saw out the opening for the device from the mounting area.
• Screw the device to the mounting angles with suitable screws.
• Saw out the opening for the device from the mounting area.
• Screw the device to the mounting angles with suitable screws.