Sony HT-GT1 HTGT1 User Manual
Product codes
HTGT1
HT-GT1.GB.4-542-874-
12(1)
30
GB
Setting the BLUETOOTH
audio codecs
You can select the BLUETOOTH
audio codecs when the connected
BLUETOOTH device supports
Advanced Audio Coding (AAC).
audio codecs when the connected
BLUETOOTH device supports
Advanced Audio Coding (AAC).
1
Press OPTIONS.
2
Press
/ repeatedly to select
“BT AAC,” then press .
3
Press
/ repeatedly to select
“ON” or “OFF,” then press .
ˎ
ON: Select this setting if the
BLUETOOTH device supports
Advanced Audio Coding (AAC).
BLUETOOTH device supports
Advanced Audio Coding (AAC).
ˎ
OFF: Select this setting if
the BLUETOOTH device only
supports Sub Band Codec
(SBC).
the BLUETOOTH device only
supports Sub Band Codec
(SBC).
Notes
ˎ
You can enjoy high quality sound if
the AAC is selected. In case you cannot
listen to AAC sound from your device,
select “OFF.”
the AAC is selected. In case you cannot
listen to AAC sound from your device,
select “OFF.”
ˎ
If you change this setting while the
system is connected to a BLUETOOTH
device, the BLUETOOTH device will
be disconnected. To connect to the
BLUETOOTH device, perform the
BLUETOOTH connection again.
system is connected to a BLUETOOTH
device, the BLUETOOTH device will
be disconnected. To connect to the
BLUETOOTH device, perform the
BLUETOOTH connection again.
Setting the BLUETOOTH
standby mode
The BLUETOOTH standby mode
enables the system to turn on
automatically when you establish
the BLUETOOTH connection with a
BLUETOOTH device.
enables the system to turn on
automatically when you establish
the BLUETOOTH connection with a
BLUETOOTH device.
1
Press OPTIONS.
2
Press
/ repeatedly to select
“BT STBY,” then press .
3
Press
/ repeatedly to select
“ON” or “OFF,” then press .
When the BLUETOOTH standby
mode is set to on, the system waits
for a BLUETOOTH connection even
when the system has been turned
off. When a BLUETOOTH connection
is established, the system turns on
automatically.
mode is set to on, the system waits
for a BLUETOOTH connection even
when the system has been turned
off. When a BLUETOOTH connection
is established, the system turns on
automatically.