Mc Crypt X-over 85 active switch 310730 Data Sheet
Product codes
310730
20
Intended Use
The active cross-over X-OVER 85 is used to split up low-level audio signals in different frequency ranges. The output
signals are also low-level audio signals. The device is installed between the audio sources and amplifiers for this.
The product is only approved for connection to 110 - 120 V/60 Hz or 220 - 240 V/50 Hz alternating voltage.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances.
Any use other than that described above will damage this product and involves the risk of short circuit, fire, electric
shock, etc.
The entire product must not be modified or converted, and the casing must not be opened.
The safety information must be observed at all times.
signals are also low-level audio signals. The device is installed between the audio sources and amplifiers for this.
The product is only approved for connection to 110 - 120 V/60 Hz or 220 - 240 V/50 Hz alternating voltage.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances.
Any use other than that described above will damage this product and involves the risk of short circuit, fire, electric
shock, etc.
The entire product must not be modified or converted, and the casing must not be opened.
The safety information must be observed at all times.
Product Description
• 2-directional for subwoofer satellite operation
• cinch- and XLR-connections
• 12 dB filter
• integrated 18dB subsonic filter
• subwoofer phase can be switched
• status displays for information on the operating condition
• 19" casing with rack mounting option
Symbols
This symbol on the device indicates that the user must read these operating instructions before
using the product and observe them during operation.
using the product and observe them during operation.
The symbol with a lightning in a triangle is used where there is a health hazard, e.g. from electric
shock. The device contains no parts that require servicing by the user. Therefore, never open
the device.
shock. The device contains no parts that require servicing by the user. Therefore, never open
the device.
The arrow symbol indicates special advice and operating information.
The exclamation mark indicates important notes in these operating instructions that must be
strictly observed.
strictly observed.