Tagamoto VW-W4607HE-K Starter kit VW-W4607HE-K Data Sheet
Product codes
VW-W4607HE-K
TM
IMPORTANT: To read Road Codes make sure your Tagamoto vehicle is in Road Code mode.
Briefly press the orange hexagonal “ON” switch on the bottom of the vehicle to enter Road
Code mode. Holding the “ON” button for 4 seconds or more disables the Road Code reader
and places the vehicle in Off Road mode for free play without tracks or Road Codes.
About Tagamoto Road Codes:
- Each code can only be read in one direction.
- road code arrow must face forward while traveling in right lane of track
- Road Codes have an adhesive backing and are reusable and moveable.
- For best results apply codes only to a clean road surface.
- Avoid getting dust and dirt on adhesive backing.
- Do not place codes too close together on road. Most codes work
consecutively when placed one straight track apart; some combinations
require more distance. Explore to find out how they work together.
- Use caution not to damage codes when peeling them off the track.
Instructions for Using Road Codes:
Do not place two codes
on one piece of track
Do not place codes
in open areas
of the tracks
DO NOT
DO
Do not place codes on
the raised details of track.
TAGAMOTO™ is a trademark of Innovation First, Inc. © Copyright 2012.
All Rights Reserved. Patents and/or Patents Pending: innovationfirst.com/patents. Product may vary from depiction.
Place all codes facing
in the proper direction,
snuggly against track rails
B
A
For Straight Track
For Outside Curve
Do not place codes too
close together on adjacent track
Do not place
codes facing
the wrong way
A
A
A
A
A
A
A
A
A
A
B
B