3D Systems 350166 Data Sheet

53

•

Clean the Cube’s exterior with a lint free cloth and water. 

Dampen the cloth with water and wipe the outer surfaces of 

any debris that is visible.

•

Submerge print pad in a container filled with warm city (tap)

water. Please do not use well water; it contains certain min-

erals that may make your creation difficult to remove from

the print pad.

•

Rinse pad under tap water and dry using a lint free wipe.

•

Using the small pliers, pull away any plastic debris away from the nozzle tip.

•

If the debris is stubborn, the nozzle may need to be heated to make the debris soft 

enough to remove.