Conrad Digital Thermometer Module With LED Display Kit 192147 Data Sheet
Product codes
192147
1.6 Spindle-trimmer
potentiometer
Solder now both the spindle-trimmer potentiometers in the circuit.
P1 = 100 k
P2 = 100 k
1.7 LED seven-segment displays
Set the LED-displays in the 40-pin IC-socket.
See to it that each of the decimal points are below.
LD1 = D 350 PA, TDSR 5150, SL 1119, LTS 546 AP, 0S-516 HWA or the like
LD2 = D 350 PA, TDSR 5150, SL 1119, LTS 546 AP, 0S-516 HWA or the like
LD3 = D 350 PA, TDSR 5150, SL 1119, LTS 546 AP, 0S-516 HWA or the like
LD4 = D 350 PA, TDSR 5150, SL 1119, LTS 546 AP, 0S-516 HWA or the like
LD2 = D 350 PA, TDSR 5150, SL 1119, LTS 546 AP, 0S-516 HWA or the like
LD3 = D 350 PA, TDSR 5150, SL 1119, LTS 546 AP, 0S-516 HWA or the like
LD4 = D 350 PA, TDSR 5150, SL 1119, LTS 546 AP, 0S-516 HWA or the like
1.8 Voltage
regulator
The integrated voltage regulator (after bending the contact pins) is now inserted in the
openings provided and the contact pins are soldered on the soldering side.
openings provided and the contact pins are soldered on the soldering side.
Pay attention to a short soldering time, so that the voltage regulator is not destroyed by
overheating.
overheating.
IC3 = 7805 TO 220
(Inscription must
be readable)
be readable)