Conrad Digital Thermometer Module With LED Display Kit 192147 Data Sheet
Product codes
192147
the help of P1, and the equalisation thus comes to an end. In order to achieve the
maximum accuracy, the 0° and 100°C equalisation must be repeated.
maximum accuracy, the 0° and 100°C equalisation must be repeated.
The selection of the equalisation method also depends upon the later use. For instance,
if temperatures are to be measured mainly in the living area (below 50°C) the method
with the clinical thermometer is more appropriate, because it covers these temperatures
in a better way. If temperatures above 50°C (0°...100°C) are to be measured more
frequently, the boiling water method is to be preferred.
if temperatures are to be measured mainly in the living area (below 50°C) the method
with the clinical thermometer is more appropriate, because it covers these temperatures
in a better way. If temperatures above 50°C (0°...100°C) are to be measured more
frequently, the boiling water method is to be preferred.
Fault
If it can be assumed that a safe operation is no longer possible, then the device must be
taken out of service and safeguarded against unintentional use.
taken out of service and safeguarded against unintentional use.
This is applicable:
• when damages are visible on the device
• when the device is no longer functional
• when parts of the device have become loose
• when the connecting cables show visible damages.
In case the device needs to be repaired, then only the original spare parts must be
used! The use of spare parts other than original can lead to serious damage to
property and injuries to persons!
used! The use of spare parts other than original can lead to serious damage to
property and injuries to persons!
The device may be repaired only by an expert!
Warranty
This device comes with a warranty of 1 year. The warranty includes the free removal of
faults, which can be traced back to the use of improper materials or manufacturing
defects.
faults, which can be traced back to the use of improper materials or manufacturing
defects.
Since we have no influence on the correct and proper assembly, we can understandably
give warranty only for the completeness and the perfect condition of the components.
give warranty only for the completeness and the perfect condition of the components.
A functioning of the components in the uninstalled state corresponding to the
characteristics and the adherence of the circuit to the technical data in case of proper
and prescribed commissioning and operation in accordance with the soldering guidelines
is guaranteed.
characteristics and the adherence of the circuit to the technical data in case of proper
and prescribed commissioning and operation in accordance with the soldering guidelines
is guaranteed.
Another other claims are ruled out.
We assume neither a warranty nor any kind of liability for damages or consequential
damages caused in the context of this product. We reserve the right to repair or improve
the device, deliver the spare parts or refund the purchase price.
damages caused in the context of this product. We reserve the right to repair or improve
the device, deliver the spare parts or refund the purchase price.
No repair will be done and the warranty claim will become null and void in case of the
following:
• if soldering tin containing acid, soldering grease or acidic soldering flux etc., has
following:
• if soldering tin containing acid, soldering grease or acidic soldering flux etc., has
been used for soldering,
• if the component has been soldered or assembled in an improper or unprofessional
way.
The same is also true
• in case of attempts to change or repair the device