Deditec RO-ETH MODUL 32 OPTOKOPPLER IN RO-ETH-O32 Data Sheet
Product codes
RO-ETH-O32
Configuring the module | Seite
15
1. Scan RO-ETH modules: So you can find all DEDITEC ETH modules on local
ethernet stream. Therefore we use an ethernet protocol which will not be
routed. Because of that you can configure only modules which are connected
to the bus. The advantage of this method is, that you can find modules which
are not in the same sub net, of which you are configuring.
routed. Because of that you can configure only modules which are connected
to the bus. The advantage of this method is, that you can find modules which
are not in the same sub net, of which you are configuring.
2. Click on the module, which you want to configure.