Phoenix Contact Distributed I/O device IBS RL 24 DO 8/8-2A-LK 2731034 2731034 Data Sheet

Nov 14, 2013    1 / 10

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in

the user's documentation. Our General Terms of Use for Downloads are valid

(http://download.phoenixcontact.com)

Digital output device for INTERBUS; fiber optic technology with 500 kbaud, 8 outputs (24 V DC, 2 A),

actuator connection via 5-pos. M12 female connectors, rugged metal housing, IP67 protection

Product Description

INTERBUS Ruggedline modules are provided for harsh ambient conditions or in the case of high requirements regarding system

diagnostics. To ensure maximum availability, these modules are equipped with a zinc die-cast housing (IP67). Therefore, they can be

installed in the direct vicinity of welding tongs.Each Ruggedline module consists of a mounting plate and and electronics module. The

electronics module is snapped onto the mounting plate and fixed with two screws if necessary.I/O errors can be clearly localized by

means of extended diagnostics. Short-circuits of the power supply of the sensors, for example, are reported in groups of 4 inputs. And,

in the case of a short-circuit at an output, the respective output is even reported directly. This information will be made available to the

controller and displayed at the module.In the case of modules with fiber optic connection, the diagnostics capability even goes one step

further. By using the latest fiber optic technology, the quality of the transmission path is permanently ascertained and optimally adjusted.

This information is available to the controller and at the module. Due to these additional features, slow deterioration of the transmission

path can be detected before errors occur during transmission or transmission is interrupted.In the case of Ruggedline modules, the

bus medium can be selected. Apart from versions with fiber optic connection (polymer fiber), there are modules which are used with

twisted pair cables. The bus medium can be changed from FO installation to a copper medium at any time using the corresponding

plug-in adapters.The bus is connected by means of IP67 plug-in plugs, which transport both the bus signal and the power supply to

the modules. For easy preparation, the power supply cable is connected to the plug using the QUICKON fast connection method, and

connection of the fiber optic cable is made using a simple cutting and assembly tool; additional polishing is not necessary.If a fiber optic

bus cable is assembled by the user, e.g. the bridge between 2 modules, it must be at least one meter long. For shorter cable bridges,

please use only cable bridges from Phoenix Contact.  

Product Features

 Rugged metal housing
 Comprehensive diagnostic functions
 Rugged Line connector for INTERBUS, either with fiber optic or twisted pair, and supply voltage
 M12 connector for I/O devices

  

Key commercial data

1

4017918185633

Technical data

Note:

EMC: class A product, see manufacturer's declaration in the

download area

Dimensions

179 mm