Phoenix Contact Bus coupler IBS ST ZF 24 BK DIO 8/8/3-T 2750798 2750798 Data Sheet

Nov 14, 2013    1 / 6

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in

the user's documentation. Our General Terms of Use for Downloads are valid

(http://download.phoenixcontact.com)

The illustration shows version IBS

ST 24 BK DIO 8/8/3-LK

INTERBUS-ST I/O bus terminal module, 8 digital inputs, 8 digital outputs, 500 mA, I/Os additionally

available via FLK plug, IP20 protection, consisting of: Terminal part with spring-cage connection and

module electronics

Product Description

INTERBUS ST bus terminal modules with additional interfaces (I/O)In addition to the actual bus terminal module functions, 8 digital

inputs and 8 digital outputs are integrated into the INTERBUS input/output bus terminal modules. On top of this, the modules can be

extended by up to four INTERBUS-ST input/output modules. All the bus terminal module functions, such as switching of the input/output

modules from the INTERBUS network remain available without restrictions.This bus terminal module is particularly suitable for use in

applications for which very little space is available, or where only a few input/output points are required.The IBS ST 24 BK DIO 8/8/3-

T or -LK modules provide the option of assigning inputs and outputs either by screw terminal blocks in the termination block, or using

an FLK system connector. This permits the ELR 319 electronic load relay or VARIOFACE input/output modules to be connected simply

using 14-pos. FLK connectors.The IBS ST 24 BK RB-T or IBS ST 24 BK RB-LK modules have an additional remote bus branch. This

remote bus branch has the same restrictions regarding structure as any remote bus. All devices with remote bus interface can be linked

in here.All INTERBUS bus terminal modules make it possible to individually ebnable/disable the additional bus interfaces. To some

extent, they perform the role of two bus terminal modules in the INTERBUS system and are also treated as such in the address lists and

configuring software (CMD).Note: When configuring buses branching off from the bus terminal modules, please observe the topology

supported by INTERBUS controller boards.  

Product Features

 Remote bus connections using copper technology
 Electrical isolation
 8 digital inputs
 8 digital outputs
 Diagnostic and status indicators
 DIN rail mounting

Key commercial data

1

4017918108410

Technical data

Note:

EMC: class A product, see manufacturer's declaration in the

download area

Dimensions

118 mm

117 mm

116 mm