Phoenix Contact I/O module IBS IP CDIO/R 24-12/4/8 2730064 2730064 Data Sheet

Nov 13, 2013    1 / 5

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in

the user's documentation. Our General Terms of Use for Downloads are valid

(http://download.phoenixcontact.com)

The illustration shows version IBS

IP CDIO/R 24-8

Digital input/output module, for use on robots, IP65 protection, 12 inputs, 24 V DC, 4-wire connection

method and 4 outputs, 24 V DC, 0.5 A/2 A, 3-wire connection method

Product Description

The IBS IP CDIO/R 24... modules are available as an input/output unit for the robot concept. The metal housing allows them to be used

in welding applications. The module can be used directly on the welding transformer if it is mounted on a terminal box. The modules

are connected via a 17-pin circular connector. In addition to the INTERBUS and power supply lines, this connector also carries two

further signal lines for constant current regulation (CCR) and for secondary circuit monitoring (SCM). These signals are looped in on

the underside of the .../SF devices and are needed at the welding current controller for control and monitoring tasks. Two module types

are available: The IBS IP CDIO/R 24-8 ... module has 8 channels that can be used either as inputs or as outputs. The IBS IP CDIO/R

24-12/4/8 .. module has 12 inputs and 4 outputs.  

Product Features

 12 digital inputs
 4 digital outputs
 Diagnostic and status indicators

Key commercial data

1

4017918437329

Technical data

Ambient conditions

IP65

Interfaces

Installation remote bus

Power supply

3.6 V

PP

Electrical isolation

Supply voltage US1; sensor supply 500 V AC 50 Hz 1 min

Supply voltage US2 500 V AC 50 Hz 1 min

Bus logic, incoming and outgoing remote bus 500 V AC 50 Hz 1

min

Inputs