Phoenix Contact I/O module IB ST 24 BAO 8/U-8B 2721031 2721031 Data Sheet

Product codes
2721031
Page of 5
Nov 14, 2013    1 / 5
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
INTERBUS-ST analog output module, D/A resolution 13-bit, 8 outputs, 0 to 10 V, consisting of:
Terminal part with screw connection and module electronics
Product Description
INTERBUS ST standard analog output modulesThese 8-channel output modules are an inexpensive alternative in applications with
many analog actuators.In addition to the standard output voltage of -10 to +10 V, the IB ST 24 BAO 8/U offers an extended output range
of -12 to +12 V.If the high 12-bit resolution of the output value is not necessary, the IB ST 24 BAO 8/U-8B gives you the option of saving
PLC memory by combining two channels of 8 bits each into one data word. Further features are:- Diagnostic LEDs provide information
on the operating status at any time.- All modules can be individually labeled on the large pull-out labeling field. The insert cards can be
prepared by hand, or by plotter or printer.- In the event of failure or malfunction, the electronics of the module can be easily replaced.
The passive termination block remains mounted on the rail. This means that the replacement process can be carried out in a just a few
seconds and without the need for tools.- The fuses are accessible from outside, so that a fault can be cleared quickly.- The connection
to protective earth ground is made directly via the DIN rail.- The conventional labeling materials (Zack strip ZB-6, etc.) can be used to
label the termination blocks.  
Product Features
 Standard signal types (voltage and current)
 Temperature measurement modules
 8 analog bipolar outputs
 Connection of actuators in 2-wire technology
Key commercial data
package_quantity
1
GTIN
4017918140335
Technical data
Note:
Utilization restriction
EMC: class A product, see manufacturer's declaration in the
download area
Dimensions
Width
118 mm
Height
117 mm
Length
116 mm
Interfaces
Interface
ST local bus
Connection method
ST local bus connector
Transmission speed
500 kBit/s