Phoenix Contact I/O module IB ST 24 AO 4/SF4 2750578 2750578 Data Sheet

Nov 13, 2013    1 / 6

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in

the user's documentation. Our General Terms of Use for Downloads are valid

(http://download.phoenixcontact.com)

The illustration shows version IB

ST 24 AO 4/SF

INTERBUS-ST analog output module, D/A resolution 13-bit, 4 outputs, 4 to 20 mA, 0 to 10 V,

consisting of: Terminal part with screw connection and module electronics

Product Description

INTERBUS ST analog output modulesThese INTERBUS analog output modules can be used to connect all actuators which work with

the standardized voltage or current ranges 0-10 V or 0 (4) - 20 mA or -10 V to +10 V.- Both signals are made available simultaneously

for all channels, so that "current" and "voltage" actuators can be mixed.- All commercially available actuators can be connected without

additional interconnecting terminals.- Diagnostic LEDs provide information on the operating status at any time.- All modules can be

individually labeled on the large pull-out labeling field. The insert cards can be prepared by hand, or by plotter or printer.- In the event

of failure or malfunction, the electronics of the module can be easily replaced. The passive termination block remains mounted on the

rail. This means that the replacement process can be carried out in a just a few seconds and without the need for tools.- The fuses are

accessible from outside, so that a fault can be cleared quickly.- The connection to protective earth ground is made directly via the DIN

rail.- The conventional labeling materials (Zack strip ZB-6, etc.) can be used to label the termination blocks.  

Product Features

 Standard signal types (voltage and current)
 Temperature measurement modules

Key commercial data

1

4017918105037

Technical data

Note:

EMC: class A product, see manufacturer's declaration in the

download area

Dimensions

118 mm

117 mm

116 mm

Interfaces

ST local bus

ST local bus connector

500 kBit/s

Power supply