Brother QL-500 User Manual
7
z
GETT
ING
S
T
ART
ED
Connecting to the Power Supply
1
Connect the AC power cord to the QL-500/550.
2
Plug the AC power cord into a standard electrical outlet.
Connecting to the Power Supply
• Check that the electrical outlet is 220 - 240 V before
inserting the plug.
• Remove the AC power cord from the electrical outlet after
you have finished using the QL-500/550.
• Do not pull the cord when removing it from the electrical
outlet. The wire in the cord may become damaged.
Do not connect the QL-500/550 to the USB port of your personal computer yet.
Do not connect the QL-500/550 to your personal computer until
directed to do so when installing the printer driver. If the QL-
500/550 is connected to a personal computer that does not have
the printer driver software installed, the dialog box shown here
will appear. Click [Cancel], remove the USB cable, and then
install the printer driver software.
Refer to “Installing the Software” on page 11.
directed to do so when installing the printer driver. If the QL-
500/550 is connected to a personal computer that does not have
the printer driver software installed, the dialog box shown here
will appear. Click [Cancel], remove the USB cable, and then
install the printer driver software.
Refer to “Installing the Software” on page 11.