LevelOne VDS-0202 (BNC Connection) VDS-0202 Leaflet
Product codes
VDS-0202
Ethernet over VDSL2 Converter
VDS-0202 (BNC)
one world_one brand_one level_
Digital Data Communications GmbH.
Zeche-Norm St. 25, 44319, Dortmund, Germany
All mentioned brand names are registered trademarks and property of their owners.
Technical specifications are subject to change without notice.
All mentioned brand names are registered trademarks and property of their owners.
Technical specifications are subject to change without notice.
© 2008 All Rights Reserved
www.level1.com
H/W Ver.1.x
VDS-0202 (BNC Connection)
Why convert Ethernet to VDSL2?
The LevelOne VDS-0202 converts your data from Ethernet to VDSL2, making it easy to
send high-bandwidth data over long distances. This new technology uses traditional
coaxial cable instead of expensive Cat.5 cables.
New technology = cost-effective deployment
When using VDSL2 (Very High Speed Digital Subscriber Line) technology, users can
transmit data up to 400 meters without having to add expensive Ethernet switches or
cables to extend the network reach. And with 100Mbps downstream and 60Mbps
upstream, VDSL2 technology provides ample room for all high-bandwidth usage.
Fast transfer speeds? Yes. Easy Installation? Yes.
VDS-0202 works especially well in applications where traditional copper phone lines
are already installed: apartments, condominiums, hotels, university campus, etc.
There is no need to run expensive Ethernet cables and installers can easily integrate
VDSL2 technology into the existing network. The VDS-0202 is plug and play ready and
requires minimum installation time.
Customized settings
Each VDS-0202 also allows for customized settings for advanced use. Using a built-in
DIP switch, users can customize the behavior of the device to match the desired
network configuration.
BNC connector
For use in networks that utilize coaxial cables for the Digital Subscriber Line.
The LevelOne VDS-0202 converts your data from Ethernet to VDSL2, making it easy to
send high-bandwidth data over long distances. This new technology uses traditional
coaxial cable instead of expensive Cat.5 cables.
New technology = cost-effective deployment
When using VDSL2 (Very High Speed Digital Subscriber Line) technology, users can
transmit data up to 400 meters without having to add expensive Ethernet switches or
cables to extend the network reach. And with 100Mbps downstream and 60Mbps
upstream, VDSL2 technology provides ample room for all high-bandwidth usage.
Fast transfer speeds? Yes. Easy Installation? Yes.
VDS-0202 works especially well in applications where traditional copper phone lines
are already installed: apartments, condominiums, hotels, university campus, etc.
There is no need to run expensive Ethernet cables and installers can easily integrate
VDSL2 technology into the existing network. The VDS-0202 is plug and play ready and
requires minimum installation time.
Customized settings
Each VDS-0202 also allows for customized settings for advanced use. Using a built-in
DIP switch, users can customize the behavior of the device to match the desired
network configuration.
BNC connector
For use in networks that utilize coaxial cables for the Digital Subscriber Line.
VDS-0202
Key Features
•
Supports a VDSL2 connection up to 2km over
coaxial cable
coaxial cable
•
Provides100Mbps downstream and 60Mbps
upstream over 400m
upstream over 400m
•
Compliant with ITU-T G.993.1, G.993.2 VDSL/VDSL2
and SG15Q4 DMT standards
and SG15Q4 DMT standards
•
Auto MDI/MDIX for 10/100 BaseT Ethernet LAN Ports
•
Features selectable Fast and Interleaved modes
•
Selectable fixed data rate and fixed SNR margin
•
Features 4 Dip Switches for Configuration Settings
•
Low-Latency for Video/Voice/Data applications
Technical Specification
VDSL2 Transmission
• ITU-T G.993.1/2, SG15Q4 DMT Compliance
• Trellis Code with 1024 DMT bins
• Max Data Rate: 100/60 Mbps
• RJ-45 Connector x 2
• BNC Connector x1
• Trellis Code with 1024 DMT bins
• Max Data Rate: 100/60 Mbps
• RJ-45 Connector x 2
• BNC Connector x1
LAN Interface
• Auto-Detection for 10/100 BaseT and Half/Full
duplex
• High performance bridge for Ethernet extension
• Fully compatible with IEEE802.3/IEEE802.3u
• Automatic MDIX Function
• RJ-45 Connector x 2
• ITU-T G.993.1/2, SG15Q4 DMT Compliance
• Trellis Code with 1024 DMT bins
• Fully compatible with IEEE802.3/IEEE802.3u
• Automatic MDIX Function
• RJ-45 Connector x 2
• ITU-T G.993.1/2, SG15Q4 DMT Compliance
• Trellis Code with 1024 DMT bins
Physical Specifications
LEDs
Power , LAN1, LAN2 , BNC , M/S
Power Supply
DC 5V, 2A
Dimension
120mm (L) x 90mm (W) x 28mm (H)
Operating Temperature and Humidity
Operating: 0°C ~ 50°C
Humidity: 0% ~ 70% (non-condensing)
EMI Certifications
CE, FCC Class B
Power , LAN1, LAN2 , BNC , M/S
Power Supply
DC 5V, 2A
Dimension
120mm (L) x 90mm (W) x 28mm (H)
Operating Temperature and Humidity
Operating: 0°C ~ 50°C
Humidity: 0% ~ 70% (non-condensing)
EMI Certifications
CE, FCC Class B
Physical Specifications
• VDS-0202 VDSL2 Converter
• 5VDC/2A Power Adaptor
• User Manual CD
• 5VDC/2A Power Adaptor
• User Manual CD