Panasonic TH-37PX8B User Manual

26

Controls the connected equipment with VIERA Link function, and enables various 

convenient recording, playback, etc. (p. 47 - 49)

• 

You can also access VIERA Link Menu directly using the VIERA Link button on the 

remote control.

Selects four different screen settings (Dynamic / Normal / Cinema / Eco)

Dynamic : Provides enhanced picture contrast and sharpness when viewing in a bright room

Normal   : Recommended for viewing under normal ambient room lighting conditions

Cinema   : For watching movies in a darkened room producing a cinema-like picture

Eco        : Adjusts picture settings automatically dependent on ambient lighting conditions

In each Viewing Mode setting, Contrast, Brightness, Colour, Sharpness, Tint, Colour Balance, 

Colour Management and 3D-COMB can be adjusted and stored to suit your particular viewing 

requirement (e.g., you may require different settings for viewing sports, fi lms, news etc.)

• 

Set for each input signal

• 

Changes will be stored automatically

Increases or decreases the levels of these options according to your personal preference

With an NTSC signal source connected to the TV, the picture hue can be adjusted to 

suit your taste

• 

For NTSC signal reception only

Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)

Automatically adjusts colours to vivid ones (Off / On)

• 

Not valid on PC signal

Picture Noise Reduction

Automatically reduces unwanted picture noise and fl icker noise in the contoured parts of 

a picture (Off / Min / Mid / Max)

• 

Not valid on PC signal

Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen

Set to “On” to display sharper and more accurate colours (Off / On)

• 

For PAL or NTSC signal reception only 

• 

Not valid on RGB, S-Video, Component, PC, HDMI and SD Card

Press the OK button to reset the present Picture Mode to the default settings

Select two different sound settings (Music / Speech)

In each Sound Mode setting, Bass and Treble can be adjusted and stored to suit your 

particular sound requirement

Changes to any settings in a mode will affect all signal sources

Sound quality can be improved

Increases or decreases level to enhance or minimise lower, deeper sound output 

Increases or decreases level to enhance or minimise sharper, higher sound output 

Adjusts volume level of right and left speakers

Adjusts the volume of the headphones 

Surround sound settings (Off / On)

Provides a dynamic enhancer to simulate improved spatial effects

• 

Switching is also possible by the Surround button on the remote control (p. 9).

Adjusts volume of individual programme or input mode

Adjusts the low frequency sound (Over 30cm / Up to 30cm)

• 

If the back space between the TV and wall is over 30 cm, “Over 30cm” is recommended.

• 

If the back space between the TV and wall is within 30 cm, “Up to 30cm” is recommended.

Selects the preferred language for DVB multi audio (depending on the broadcaster)

NICAM (Near Instantaneous Companded Audio Multiplex)

A format for digital sound over television

Reproduces stereo sound (Off / On)

• 

Off if reception is poor (FM monaural sound)

• 

Analogue mode only

Select to fi t the input signal (Auto / Digital / Analogue) (p. 52)
Auto        : Automatic detection of digital or analogue sound source

Digital      : HDMI cable connection

Analogue : HDMI-DVI adapter cable connection

• 

HDMI input mode only

• 

HDMI2 / 3 terminals are for digital signal only

• 

No setting for HDMI2 / 3 available

Useful for visually-impaired viewers (Off / On)

Select “On” to activate the description sound track if available

Adjusts the volume for audio description

Set to “On” to activate the description sound track from TV speakers (Off / On)

Set to “On” to activate the description sound track from headphones (Off / On)

Press the OK button to reset the present Sound Mode to the default settings

• 

Effective to Bass, Treble, Balance, Headphone Volume and Surround