ZyXEL VMG1312-B10A VMG1312-B10A-EU01V1F Data Sheet

Chapter 28 TR-069 Client

VMG1312-B10A User’s Guide

The following table describes the fields in this screen. 

Maintenance > TR-069 Client

Inform

Select Enable for the Device to send periodic inform via TR-069 on the WAN. Otherwise, 
select Disable.

Inform Interval

Enter the time interval (in seconds) at which the Device sends information to the auto-
configuration server.

ACS URL

Enter the URL or IP address of the auto-configuration server.

ACS User Name Enter the TR-069 user name for authentication with the auto-configuration server.

ACS Password

Enter the TR-069 password for authentication with the auto-configuration server.

WAN Interface 
used by TR-069 
client

Select a WAN interface through which the TR-069 traffic passes.

If you select Any_WAN, you should also select the pre-configured WAN connection(s).

Display SOAP 
messages on 
serial console

Select Enable to show the SOAP messages on the console.

Connection 
Request 
Authentication

Select this option to enable authentication when there is a connection request from the ACS.

Connection 
Request User 
Name

Enter the connection request user name.

When the ACS makes a connection request to the Device, this user name is used to 
authenticate the ACS.

Connection 
Request 
Password

Enter the connection request password.

When the ACS makes a connection request to the Device, this password is used to 
authenticate the ACS.

Connection 
Request URL

This shows the connection request URL.

The ACS can use this URL to make a connection request to the Device.

Local certificate 
used by TR-069 
client

You can choose a local certificate used by TR-069 client. The local certificate should be 
imported in the Security > Certificates > Local Certificates screen. 

Apply

Click Apply to save your changes.

Cancel

Click Cancel to exit this screen without saving.