Buffalo TeraStation 3400 16TB TS3400D1604 Data Sheet
Product codes
TS3400D1604
81
configured, log in with an account with write privileges.
21
Time Machine will count down from 120 seconds, and the backup will begin.
Copying from a USB Device
Use Direct Copy to copy from a USB device directly to the TeraStation.
Note: To use Direct Copy, connect only one USB device at a time.
These devices are supported:
• USB mass storage devices
• Card readers (except for card readers that can recognize two or more memory cards)
• Digital cameras and other PTP devices
• UPS devices that are specifically indicated as compatible
• USB printers
• Card readers (except for card readers that can recognize two or more memory cards)
• Digital cameras and other PTP devices
• UPS devices that are specifically indicated as compatible
• USB printers
These devices are not supported:
• USB hubs
• Mice
• Keyboards
• Mice
• Keyboards
1
In Settings, move the Direct Copy switch to the
position to enable Direct Copy.
2
Connect the USB device. When it mounts (about 10 seconds), the function button will light up.
Note: Devices that don’t trigger the function button to light up are not supported.
3
You now have 60 seconds to hold down the function button for 3 seconds. If you do, the function button will flash
as all the files on the USB device are copied to the Direct Copy folder of the TeraStation.
as all the files on the USB device are copied to the Direct Copy folder of the TeraStation.
Notes:
• While the function button is flashing, hold it down for 3 seconds to cancel Direct Copy.
• For digital cameras that are not in the USB mass storage class, all files from the digital camera are copied.
• To change the Direct Copy target folder, navigate to Backup - Direct Copy - Edit, select a new folder, and click OK.
• While the function button is flashing, hold it down for 3 seconds to cancel Direct Copy.
• For digital cameras that are not in the USB mass storage class, all files from the digital camera are copied.
• To change the Direct Copy target folder, navigate to Backup - Direct Copy - Edit, select a new folder, and click OK.