TP-LINK TL-SG108 User Manual
Easy Smart Configuration Utility
User Guide
15
3.2 IP Setting
Each device in the network possesses a unique IP address. You can login the IP Setting page to
operate the switch using this IP address. The switch supports the DHCP mode to obtain an IP
address from the DHCP server.
operate the switch using this IP address. The switch supports the DHCP mode to obtain an IP
address from the DHCP server.
On this page you can get and modify the network parameters of the switch.
Choose the menu System→IP Setting to load the following page.
Figure 3-2 System IP Address Setting
The following entries are displayed on this screen:
¾
System IP Address Setting
DHCP Setting:
Enable or disable the DHCP function. If DHCP setting is enabled, the
switch will obtain the IP address, subnet Mask and default gateway
from the DHCP Server automatically; otherwise, these three items
should be configured manually. By default, it is disabled.
switch will obtain the IP address, subnet Mask and default gateway
from the DHCP Server automatically; otherwise, these three items
should be configured manually. By default, it is disabled.
IP Address:
Enter the system IP of the switch. The default system IP is
192.168.0.1 and you can change it appropriate to your needs.
192.168.0.1 and you can change it appropriate to your needs.
Subnet Mask:
Enter the subnet mask of the switch. By default, the switch uses
255.255.255.0 as the subnet mask.
255.255.255.0 as the subnet mask.
Default Gateway:
Enter the default gateway of the switch.
3.3 User Account
On this page you can modify the administrator’s username and password in order to refuse illegal
users.
users.
Choose the menu System→User Account to load the following page.