QNAP REXP-1200U-RP User Manual

2.1 Hardware Installation

After unpacking the NAS from the package, please first follow the instructions below to

install your hardware:

1. Install the hard drives. Please also make sure that the hard drives (HDDs) that you

use are compatible with the NAS. Go to the Hard Disk Drive Compatibility List

section for more details.

2. Connect the QNAP NAS to the same network as your PC and power it on. During

your installation process, please pay attention to LEDs and alarm buzzers to make

sure that the NAS functions properly. Go to the Checking System Status

section

for details.

Note : The steps above are also illustrated in the Quick Installation Guide (QIG) that

can be found in the product package or QNAP website (http://start.qnap.com).