TP-LINK 10/100Mbps Multi-mode Media Converter MC100CM Data Sheet

 

 

12

Use a fiber cable to connect two converters, or connect a converter 
with a 100Base-FX Device. 

1.  Connection of a Converter and a 10/100Base-TX Device (HUB or 

Switch). 

•  Make sure that the length of the Cat.5 twisted pair cable 

between the 10/100Base-TX device and the converter is less 
than 100 meters. 

•  Connect one end of the Cat.5 twisted pair cable to the RJ45 

jack on the converter and the other end of the cable to the 
RJ45 jack on the 10/100Base-TX device. 

2.  Connection of two Converters or a Converter and a 100Base-FX 

Device. 

•  Use a SC fiber cable to connect the two Converters’ SC 

connector or the SC connecter of a Converter and a 
100Base-FX Device. 

3.  Turn on the power.