TP-LINK JetStream TL-SG3216 TL-SG3216 Data Sheet
Product codes
TL-SG3216
contact-info
Description
The
contact-info command is used to configure the system contact information.
To clear the system contact information, please use
no contact-info command.
Syntax
contact-info contact_info
no contact-info
Parameter
contact_info —— Contact Information. It consists of 32 characters at most. It is
“www.tp-link.com” by default.
“www.tp-link.com” by default.
Command Mode
Global Configuration Mode
Example
Configure the system contact information as www.tp-link.com:
TL-SG3424(config)# contact-info www.tp-link.com
ip management-vlan
Description
The
ip management-vlan command is used to configure the management
VLAN, through which you can log on to the switch. By default, the management
VLAN is VLAN1.
VLAN is VLAN1.
Syntax
ip management-vlan {vlan-id}
Parameter
vlan-id —— VLAN ID, ranging from 1 to 4094.
Command Mode
Global Configuration Mode
Example
Set the VLAN6 as management VLAN:
TL-SG3424(config)# ip management-vlan 6
116