TP-LINK JetStream TL-SG3216 TL-SG3216 Data Sheet
Product codes
TL-SG3216
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
gigabitEthernet)
Example
Disable port 3:
TL-SG3424(config)# interface gigabitEthernet 1/0/3
TL-SG3424(config-if)# shutdown
flow-control
Description
The
flow-control command is used to enable the flow-control function for a port.
To disable the flow-control function for this corresponding port, please use
no
flow-control command. With the flow-control function enabled, the Ingress Rate
and Egress Rate can be synchronized to avoid packet loss in the network.
and Egress Rate can be synchronized to avoid packet loss in the network.
Syntax
flow-control
no flow-control
no flow-control
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
gigabitEthernet)
Example
Enable the flow-control function for port 3:
TL-SG3424(config)# interface gigabitEthernet 1/0/3
TL-SG3424(config-if)# flow-control
media-type
Note: This command does not apply to TL-SG3210.
Description
The
media-type command is used to configure the media type of Combo port.
For a Combo port, the media type should be configured before you set its speed
and mode.
and mode.
134